The conversion kit that offers a more immersive way to tune your suspension. Dial in ride height and spring stiffness/preload independent of each other. Developed primarily to eliminate the ability for the tires to rub on the stock dampers/shocks. This is achieved by relocating your dampers/shocks to a horizontal position. Then, converting the vertical movement to a horizontal movement. Most of the piece will utilize preexisting mounting hardware.
Whether you are after unique styling for your chassis or a different tuning experience, this will satisfy your needs.
PICTURES ARE FOR REFERENCE ONLY
Ball Cups, ball studs, turnbuckles, etc are not provided.
What's included:
5 STL Files, assembly instructions, overview video, and detailed photos are provided once purchased.
What's not included:
Bearings, extra ball studs, turnbuckles, miscellaneous screws.
Legal Notice:
All files are provided for personal, non-commercial use only. Do not resell, redistribute, or re-upload these files (modified or unmodified), and do not sell printed parts, kits, or complete chassis based on this design without my explicit written permission. You build, modify, and operate the chassis at your own risk; I assume no responsibility for any damage or injury resulting from its use.
3D printing settings:
Recommended printing setup:
- Layer height: 0.20mm strength
- Supports: N/A
- Printer: Bambu Lab P1S
- Material: SUNLU PETG
Don't have a printer? No problem... order a fully assembled kit shipped to your door! Here: https://idealautofactory.com/products/idealcchpikit





